beautypg.com

Loading media, Preparing the media, Loading and printing media – Konica Minolta Magicolor 3300DN User Manual

Page 39: Refilling an upper or optional media tray 31

background image

Loading Media

31

Loading Media

How do I prepare and load the media?

Preparing the Media

Don’t unwrap the paper above the
printer, as this might cause paper par-
ticles to fall into the printer. Don’t fan
large quantities of transparency
media.

1

Take off the top and bottom sheets of a ream of paper.

2

Holding a stack of approximately 500 sheets at a time, fan the stack to
prevent static buildup in the paper before inserting it in a tray.

Loading and Printing Media

Refilling an Upper or Optional Media Tray

The illustrations show a standard upper media tray; however,
instructions are the same for a high-capacity input feeder media tray.

Attention

Except for transparencies, do not mix media of different sizes, types, or
weights in the same tray, as this will cause printer jamming.

Check printer.konicaminolta.net/support (click on
Answer Base) for currently approved media.

This manual is related to the following products: