Konica Minolta Magicolor 3300DN - Manual (Page 72)

Replacing the Imaging Unit 64
6
Holding the imaging unit horizontally, carefully pull the tabs straight out
and completely away from the unit.
Attention
Do not twist the tab as you
are pulling it. If any tab
doesn’t pull completely
out (you must be able to
see the circle imprinted on
the end), the imaging unit
must be replaced.
7
Carefully remove the protective cover.
We
strongly suggest that you
save the packaging materials
in case you ever need to move
or ship the printer.
8
Gently guide the imaging unit
straight into the printer, following the
arrows on the printer to seat the
pins.
Attention
You can damage the unit if it is
not aligned correctly.
26"
/660 mm