Konica Minolta Magicolor 3300DN - Manual (Page 74)

Replacing the Fuser Unit 66
Replacing the Fuser Unit
WARNING!
The fuser unit is hot and can cause severe burns. When the
printer’s front cover is opened, the fuser unit temperature drops
gradually. Wait one hour after opening the front cover.
How do I replace the fuser unit?
1
Turn the printer off.
2
Open the front cover (button B).
3
Pull up the lever to relieve pressure on
the fuser unit.
4
Open the imaging unit cover .
The fuser fuses the toner onto the media.
Replace the fuser unit (fuser and media feed
rollers) when the control panel displays the
message
REPLACE FUSER UNIT.
B
1
2
1
2