Solving problems 109 – Konica Minolta Magicolor 3300DN User Manual
Page 117
Solving Problems
109
Irregular
print or
mottled
image
appears.
The media is moist
from humidity or
having water spilled on
the paper supply.
Remove the moist media and replace it with
new, dry media.
The transfer roller or
fuser unit may be
misinstalled or
defective.
Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Unsupported media is
being used.
Use KONICA MINOLTA-approved media.
See “What media types are supported?” on
page 23. Check
support (cli
approved media.
Media is
wrinkled.
The media is moist
from humidity or
having water spilled on
the paper supply.
Remove the moist media and replace it with
new, dry media.
The transfer roller or
fuser unit may be
misinstalled or
defective.
Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Unsupported media is
being used.
Use KONICA MINOLTA-approved media.
See “What media types are supported?” on
page 23. Check
support (cli
approved media.
Symptom
Cause
Solution