Konica Minolta Magicolor 3300DN - Manual (Page 150)

High-capacity Input Feeder (HCIF) 142
4
Using both hands, lift it slightly to remove it from the printer.
5
Remove any shipping tape and spacers.
6–7
Skip to step 8.
6
Repeat steps 3–5 for the lower
media tray.
7
Lock the two casters on the bottom
of the HCIF.
Attention
The casters must be locked
so the unit does not roll
unexpectedly while in
operation.
8
Turn off the printer, and then disconnect the power cord and all interface
cables from the printer.
9
With another person’s help, lift
the printer.
Do not tilt it more than 10° in
any direction at any time.
WARNING!
Your printer weighs approximately 77 lbs (35 kg) fully assembled.
Be sure to have help when lifting and moving it.
1x500 High-capacity input feeder 2x500 High-capacity input feeder
Front