Konica Minolta Magicolor 3300DN - Manual (Page 42)

Loading Media 34
7
If you have removed media from the tray, stack it with the new media,
even the edges, then reload it.
Attention
Readjust the media guides after inserting the media. Improperly
adjusted guides may cause poor print quality, media jams, or printer
damage. The paper should fit easily between the guides. Make sure
the paper corners are not bent. Do not overfill the tray.
8
Slide the media tray back into the
printer.
Check the gauge to make sure the
tray is registering the loaded media.
Use this gauge to determine when the
tray needs to be refilled.