Konica Minolta Magicolor 3300DN - Manual (Page 36)

Media 28
Postcards (Japanese size)
Notes Format label data within your application. Try printing your
data on a plain sheet of paper first to check placement.
Avoid using labels with exposed adhesive; it may stick to
the fuser, causing labels to peel off and media jams to
occur.
Adhesive label stock is supported only in letter or A4
sheets.
A label consists of a face sheet (the printing surface),
adhesive, and a carrier sheet
— The face sheet must follow the plain paper
specification.
— The face sheet surface must cover the entire carrier
sheet, and no adhesive should come through on the
surface.
You can print continuously with label paper. However, this
could affect the media feed, depending on the media
quality and printing environment. If problems occur, stop
the continuous print and print one sheet at a time.
Check your application documentation for other
information on printing labels.
Media Type Postcard
(Cannot be manually selected; automatically selected when a
postcard media size is selected; identified in the driver as
Printer Default.)
Input Tray Multipurpose tray only
Capacity Up to 100 sheets, depending on the thickness of
the postcards
Orientation Face down
Approved
Media Use only media approved for laser products. Check
printer.konicaminolta.net/support (click on Answer Base) for
currently approved media.
Duplexing Not supported