Konica Minolta Magicolor 3300DN - Manual (Page 41)

Loading Media 33
5
To set the tray for A5 paper, use the
provided A5 spacer.
a Lift the A5 spacer from its
storage place in the media tray.
b Gently lift the end media guide
to position the guide in the
proper media size hole.
c Insert the spacer into its slot and
load the A5 media.
Make sure that both the
end media guide and A5
spacer have clicked into
place.
d To return to other approved media sizes, remove the A5 spacer from
the slot, and then replace it in the tray.
6
Load the media (plain or glossy) face-up with its top toward the back of
the printer.
Often, an arrow on the media
package label indicates the
printing-side of the media. If you
can’t remember which side of the
media to print on, remove the media
from the tray, rotate the stack 180°,
turn the stack over, and then place it
back in the tray.
A fill limit mark is provided on the
inside of the tray. The upper and
optional media trays hold 500 sheets of 20 lb bond (75 g/m²) paper.
A5
A5
A5
A5
1 2