Konica Minolta Magicolor 3300DN - Manual (Page 118)

Solving Problems 110
Blotted
printing
occurs. The media is moist
from humidity or
having water spilled on
the paper supply. Remove the moist media and replace it with
new, dry media.
The transfer roller or
fuser unit may be
misinstalled or
defective. Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Unsupported media is
being used. Use KONICA MINOLTA-approved media.
See “What media types are supported?” on
page 23. Check printer.konicaminolta.net/
support (click on Answer Base) for currently
approved media.
Small
marks
occur in
or near
halftone
images. The media is too dry. Remove the dry media and replace it with
new media. Store media wrapped and in a
relative humidity of at least 30%.
The transfer roller or
fuser unit may be
misinstalled or
defective. Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Unsupported media is
being used. Use KONICA MINOLTA-approved media.
See “What media types are supported?” on
page 23. Check printer.konicaminolta.net/
support (click on Answer Base) for currently
approved media.
Symptom Cause Solution