Konica Minolta Magicolor 3300DN - Manual (Page 37)

Media 29
Transparencies (Uncoated Only)
Notes Use only Japanese Post Office standard postcards
(3.9"x5.8" [100x148 mm]) recommended for laser printers.
If the postcard is warped, press on the warped area to
flatten it before putting it in the multipurpose tray.
Using preprinted multicolored postcards may result in
printer jamming.
Media Type Transparency
Input Tray All input sources
Capacity Up to 100 sheets, depending on the thickness of
the transparencies
Orientation Upper or
optional
tray Face up
Multipur-
pose tray Face down
Approved
Media Use uncoated transparencies (also known as OHP film). We
recommend
Q-Media Transparency Media for the magicolor 3300 series
(letter and A4 sizes only)
Only media recommended for laser products. Check
printer.konicaminolta.net/support (click on Answer Base) for
currently approved media. (Often, you can’t tell by looking
at an unprinted transparency or by looking at the outside of
the package which transparencies are acceptable.) To order
approved transparencies, go to www.q-shop.com.
Media Size Only letter and A4 sized transparencies are supported.
Duplexing Not supported
Warning Using unsupported transparency media such as coated color
transparencies will result in damaging the printer and voiding
your warranty.