Konica Minolta Magicolor 3300DN - Manual (Page 24)

Media Storage and Handling 16
Layered
Adhesive
Folded, creased, embossed, warped, or wrinkled
Perforated, three-hole prepunched, or torn
Too slick, too coarse, too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Cold water transfer paper
Heat sensitive or cannot withstand the fusing temperature (between
316° F/158° C and 356° F/180° C, depending on the media)
Irregularly shaped (not rectangular or not cut at right angles); not uniform
in size
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved
Use media that is
Suitable for plain-paper laser printers, such as standard or recycled office
paper
What should I watch out for when loading envelopes?
Do not use envelopes that have
Sticky flaps
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for
sealing
Transparent windows
Too rough of a surface
Material that will melt, vaporize, offset discolor, or emit dangerous fumes
Been presealed
Use envelopes that are
Common office envelopes with diagonal joints, sharp folds and edges,
and ordinary gummed flaps
Approved for laser printing
Dry
Printed on the front address side only