Konica Minolta Magicolor 3300DN - Manual (Page 17)

Installing Printer Drivers and Utilities, Macintosh 9
Macintosh OS X—PPDs and Utilities Installation
OS X Step 1. Software Installation—Automatic
a Insert the Software Utilities CD-ROM in your Macintosh’s CD-ROM
drive.
If the CD-ROM does not start automatically, double-click the
CD-ROM icon on your Macintosh desktop.
b Double-click the Install icon.
The installer uses the path Hard Disk Name/Library/Printers/
PPDs/Contents/ Resources/ for PPDs and the path: Hard Disk
Name/Library/Fonts/ for fonts.
c Follow the instructions on the screen to install the magicolor 3300
PPD and utilities.
d After the PPD and utilities installation is complete, choose Quit.
OS X Step 2. Creating a Printer Queue
a Connect the printer to the computer using a USB or Ethernet
connection.
For USB, plug one end of the USB cable into the PC and the other into
the matching printer port.
For Ethernet, you can connect in either of two ways:
Plug one end of a crossover Ethernet cable into the Macintosh and
the other into the printer’s Ethernet port.
Use Ethernet patch cables and an Ethernet hub. Plug one end of
each patch cable into the hub, then plug the other end of one into
the Macintosh and the other end of the second into the printer’s
Ethernet port.
b Locate and double-click the Print Center utility to open it.
c In the Printer List window, choose Add Printer.