Konica Minolta Magicolor 3300DN - Manual (Page 85)

Cleaning the Printer 77
3
Grasp the two tabs on the transfer
roller to lift it straight up out of the
printer.
Be careful not to spill toner into the
printer.
Attention
Do not touch or scratch the black
surface of the transfer roller or the density sensor window.
4
With a clean, dry cloth or cotton
swab, gently wipe the density sen-
sor.
Do not use force to clean the sensor
window.
5
Replace the transfer roller by insert-
ing the pins at both ends of the
transfer roller into the U-shaped
bearings inside the printer.
6
Push down on the two tabs until
they click to lock the transfer roller car-
tridge into the printer.
2
2
1
1