Konica Minolta Magicolor 3300DN - Manual (Page 49)

System Memory (RAM) Requirements 41
System Memory (RAM) Requirements
Basic Functionality
Maximum Performance
Duplexing
Select paper with high opacity for duplex (2-sided) printing. Opacity refers to
how effectively paper blocks out what is written on the opposite side of the
page. If the paper has low opacity (high translucency), then the printed data
from one side of the page will show through to the other side. For best results,
print a small quantity to make sure the opacity is acceptable.
Only up to 28 lb bond (105 g/m²) plain paper can be autoduplexed.
Monochrome Color
Simplex Duplex Simplex Duplex
Size S/Q F S/Q F S/Q F S/Q F
Letter/
A4 256 MB (Base memory)
Legal
Notes: S = Standard print quality (600x600 dpi, full speed)
Q = Quality print quality (1200x1200 dpi, full speed)
F = Fine print quality (1200x1200 dpi, half speed)
Monochrome Color
Simplex Duplex Simplex Duplex
Size S/Q F S/Q F S/Q F S/Q F
Letter/A4 256 MB (Base memory)
Legal 288 MB
Notes: S = Standard print quality (600x600 dpi, full speed)
Q = Quality print quality (1200x1200 dpi, full speed)
F = Fine print quality (1200x1200 dpi, half speed)