Konica Minolta Magicolor 3300DN - Manual (Page 14)

Installing Printer Drivers and Utilities, Macintosh 6
available. Advanced printing features are still available under Macintosh
OS 9.
You can connect to your printer by
A USB cable
A crossover Ethernet cable
Ethernet patch cables and an Ethernet hub
Macintosh—PPDs
KONICA MINOLTA developed a PostScript Printer Description (PPD) file for
the magicolor 3300. This PPD works with the Macintosh Operating System’s
PostScript printer driver (LaserWriter) to provide support for the features on
the magicolor 3300, such as print resolution and media sizes.
Macintosh OS 9—PPDs and Utilities Installation
OS 9 Step 1. Software Installation
a Insert the Software Utilities CD-ROM in your Macintosh’s CD-ROM
drive.
If the CD-ROM does not start automatically, double-click the
CD-ROM icon on your Macintosh desktop.
b Double-click the Install icon.
c Follow the instructions on the screen to install the magicolor 3300
PPD and utilities.
d After the PPD and utilities installation is complete, choose Quit.
e When the system software installation is complete, remove the
CD-ROM from your CD-ROM drive and store it in a safe place.
OS 9 Step 2. Creating a Desktop Printer
USB Connection
a Plug one end of the USB cable into the Macintosh and the other into
the printer’s USB port.
b Locate the Desktop Printer Utility.
If you cannot locate it on your Macintosh hard disk, it can be
found on your Macintosh’s system CD-ROM.