beautypg.com

Tray cover, Installation – Konica Minolta Magicolor 3300DN User Manual

Page 157

background image

Tray Cover

149

c

Align this indicator mark with the pin 1 notch or printed label on the
controller board.

d

Gently press down on the time-of-day clock until it’s firmly seated.

4

Reinstall the controller board.

Gently slide the controller board into the printer’s tracks until it is fully
seated, and then tighten the screws.

5

Reconnect all interface cables.

6

Reconnect the power cord and turn on the printer.

In compliance with UL guidelines, “The appliance inlet is
considered to be the main disconnect device.”

The presence of the clock will be automatically sensed.

7

Print a startup page.

The time-of-day clock is not listed under “Installed Options” on the startup
page, but the time does appear as System Date in the Printer Information
column.

For instructions about setting the time-of-day clock, refer to the Crown Books.

Tray Cover

The tray cover accessory protects the media
tray(s) from dust.

Installation

1

Hook the tray cover onto the tabs on
the rear of the printer.

This manual is related to the following products: