Configuring the lpr settings, Configuring the lpr settings -16 – Konica Minolta BIZHUB C652DS User Manual
Page 83
bizhub C652/C652DS/C552/C552DS/C452
6-16
6.2
Mac OS 9.2
6
4
Click the applicable PPD file, and then click [Select] (or [Open]).
When the selected printer is registered in the "Chooser", the setting procedure is completed.
% If the window showing the installable options appears, proceed to change the option settings as
necessary. Go to Step 5.
% If the "Chooser" window appears, go to Step 7.
5
Specify the options installed in the machine in the "Options Installed 1" and "Options Installed 2"
windows.
6
Click [OK].
The "Chooser" window appears again.
7
Close the "Chooser" window.
Configuring the LPR settings
TCP/IP setting for the machine
Specify the IP address for the machine.
LPD setting for the printer
Before using LPR printing, enable LPD printing in "LPD Setting" for the machine.
d
Reference
For details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".
For details on the LPD settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the "Apple" menu, select "Control Panel" - "TCP/IP".
2
From "Connect via", select "Ethernet".
3
Select the "Configure" item and configure the settings including the IP address and subnet mask
according to the settings for the network to which the Macintosh computer is connected.