Konica Minolta BIZHUB C652DS - Manual (Page 190)

bizhub C652/C652DS/C552/C552DS/C452 12-41
12.11 Banner printing function 12
12.11 Banner printing function
On this machine, paper size up to 47-1/4 inches (1200 mm) in length can be loaded into the bypass tray for
printing, by configuring on the control panel.
In the following sections, loading long paper and printing on it are referred to as banner printing.
12.11.1 Paper
Applicable paper
12.11.2 Printer drivers and supported operating systems
The following drivers support banner printing.
- KONICA MINOLTA PCL Driver for Windows (PCL driver)
- KONICA MINOLTA PostScript Driver for Windows (PS driver)
- KONICA MINOLTA XPS Printer Driver for Windows (XPS driver)
- KONICA MINOLTA PostScript PPD Printer Driver for Mac OS X
12.11.3 Configuring the printer driver
Specify the output paper size as a custom paper size.
For Windows
0 If the finisher FS-526 is installed, banner printing cannot be enabled.
0 If the finisher FS-526 is set to the installed state for the printer driver properties, you cannot specify a
paper length of more than 18 inches (457.3 mm) for the custom paper size. Select "None" for "Finisher"
in the "Configure" tab of the printer driver.
1
Click the "Basic" tab.
% With the KONICA MINOLTA PCL Driver, custom size setting can also be registered in advance on
the "Settings" tab of the printer driver accessed from the Windows' "Printer" ("Printers and Faxes"
for Windows XP/Server 2003) window.
2
Select "Custom Size" from "Original Size" or "Paper Size".
The "Custom Size Settings" dialog box appears.
3
Select the width and the length of the custom size according to the unit you use and then click [OK].
The "Confirm settings changes" dialog box appears.
4
Click [Yes].
5
If necessary, configure "Paper Settings for Each Tray", "Bypass Tray", "Paper Type", and other
settings.
6
Click [OK].
Paper width Paper length Paper weight
8-1/4 to 11-11/16 inches
(210 to 297 mm) 18 to 47-1/4 inches (457.3 to
1200 mm) 33-13/16 to 55-7/8 lb (127 g/m
2
to 210
g/m
2
)
(Select the paper type appropriate for the
banner paper weight using the printer
driver.
33-13/16 to 41-3/4 lb (127 to 157 g/m
2
):
Thick 1+, Thick 1+ (Side 2)
42 to 55-5/8 lb (158 to 209 g/m
2 ): Thick
2, Thick 2 (Side 2)
55-7/8 lb (210 g/m
2 ): Thick 3, Thick 3
(Side 2))