Konica Minolta BIZHUB C652DS - Manual (Page 112)

bizhub C652/C652DS/C552/C552DS/C452 9-22
9.4 Parameter details 9
When "Print Device Image" is selected:
You can specify the overlay printing conditions by specifying the overlay registered in the machine.
Reference
- "Print Device Image" of the "Overlay" function is available only for the PCL driver.
- The function of [Acquire Device Information] is available only when your computer is connected to and
can communicate with the machine. To use [Acquire Device Information], in Administrator Settings of
the machine, set [System Connection] - [OpenAPI Settings] - [Authentication] to "OFF". For details, refer
to page 13-58.
Function Name Description
Obtain Device Information Select this option to communicate with the machine to read the overlay
settings configured on the machine.
Overlay Info Displays the information of the selected overlay.
Print on Front Side/print on
Back Side Select the check box to specify whether printing is done or not for each of
the front side/back side.
Overlay Name Select the overlay name registered in the machine.
Browse Click this button to display the detailed information of the selected over-
lay.
Select Color Select the overlay printing color.
Density Select the overlay printing density.
Overwrite Specify the sequence for printing the overlay on top of the original.
Same as Front Side Clear this check box to specify the same value for both the front and back
sides.
Pages Specify the pages to be printed.