Konica Minolta BIZHUB C652DS - Manual (Page 288)

bizhub C652/C652DS/C552/C552DS/C452 15-4
15.2 Cannot configure the settings/Cannot print according to the settings 15
15.2 Cannot configure the settings/Cannot print according to the
settings
Check the following items when you cannot configure settings of the printer driver or cannot print according
to the settings you have configured.
Reference
- Some items for the printer driver may not be configured simultaneously.
15.2.1 The printer driver settings have no effect
Problem Possible Cause Remedy
Cannot select items in the print-
er driver. Some functions cannot be com-
bined. Grayed out items cannot be con-
figured.
A "conflict" message saying
"unable to configure" or "func-
tion will be canceled" appears. You are trying to configure the
functions that cannot be com-
bined. Check carefully the functions you
have specified, and then specify
the functions that can be com-
bined.
Cannot print according to the
settings you have configured. The settings may not be config-
ured correctly. Check the setting of each item of
the printer driver.
The selected functions can be
combined in the printer driver,
but may not be combined in this
machine.
The paper size or paper orienta-
tion specified in the application
may take precedence over the
settings in the printer driver
when printing. Configure settings in the applica-
tion correctly.
The watermark cannot be print-
ed. The watermark settings may not
be configured correctly. Check the watermark settings.
The density of the watermark
may be too light. Check the density setting.
Some graphic applications do
not print watermarks. When using such a program, the
watermark cannot be printed.
The staple function cannot be
specified. The staple function cannot be
used if the Paper Type is set to
Thick or Transparency. Check the setting of each item of
the printer driver.
The staple function requires the
optional finisher. Install the required options and
enable them on the printer driver.
Cannot staple. When printing a large number of
pages, stapling cannot be per-
formed. Change the number of pages to
be printed.
If the document contains pages
of different sizes, stapling can-
not be performed. Check the document.
The stapling position is not as
expected. The orientation setting is not
correct. Check the stapling position in the
printer driver settings.
Cannot specify the punch func-
tion. The hole punching cannot be
specified when Booklet, Trans-
parency, Thick 2, Thick 3, or En-
velope is selected as the paper
type. Check the setting of each item of
the printer driver.
The optional finisher and punch
kit are required. Install the required options and
enable them on the printer driver.
Cannot punch. Printed pages may be fed out
without being punched if the pa-
per is loaded into the paper
source with an incorrect orienta-
tion. Check the orientation setting.