5 cover mode tab, Cover mode tab -17 – Konica Minolta BIZHUB C652DS User Manual
Page 107
bizhub C652/C652DS/C552/C552DS/C452
9-17
9.4
Parameter details
9
9.4.5
Cover Mode tab
Function Name
Option
Description
Front Cover
ON/OFF, Blank/Print
Select this check box to attach a front cover page.
It can be specified when any other option than "Auto"
is selected for Paper Tray.
Front Cover Tray
Tray 1 to Tray 4, LCT, By-
pass Tray
Select the paper tray for the front cover sheet.
Selectable items vary depending on the option installa-
tion status.
Back Cover
ON/OFF, Blank/Print
Select this check box to attach a back cover page.
It can be specified when any other option than "Auto"
is selected for Paper Tray.
Back Cover Tray
Tray 1 to Tray 4, LCT, By-
pass Tray
Select the paper tray for the back cover sheet.
Selectable items vary depending on the option installa-
tion status.
Front Cover from
Post Inserter
ON/OFF, PI Tray 1/ PI
Tray 2
Print a document with a front cover.
Back Cover from
Post Inserter
ON/OFF, PI Tray 1/ PI
Tray 2
Print a document with a back cover.
Per Page Setting
ON/OFF
Select this check box to insert paper between pages
and switch the paper and tray for each page. [Edit List]
allows you to create a list specifying conditions on a
page basis.
Edit List
List Name
Select the name of the list to be edited. The settings are
listed.
[Edit List Name]
Rename a list.
[Up]/[Down]
Click the button to move the selected condition row up
or down. Move the rows so that the page numbers are
arranged in ascending order.
[Add]
Click this button to add a condition. Specify conditions
in "Add/Delete".
[Delete]
Click this button to delete the selected condition row.
Page Number
Specify the page numbers using a numerical value. To
specify multiple pages, separate each page number
with a comma or specify the range using a hyphen.
Print Type
Specify the print type from the "Change Setting" drop-
down list.
Paper Tray
Specify the paper tray to be used from the "Change
Setting" drop-down list.
Staple
From the "Change Setting" drop-down list, specify the
number of staples and the stapling position.