Konica Minolta BIZHUB C652DS - Manual (Page 54)

bizhub C652/C652DS/C552/C552DS/C452 5-16
5.2 Windows XP/Server 2003 5
9
In the "Printer Name or IP Address" box, enter the IP address for the machine, and then click [Next].
% If the "Additional Port Information Required" dialog box appears, go to Step 10.
% If the "Finish" dialog box appears, go to Step 13.
10
Select "Custom", and then click [Settings].
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select "Raw", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
12
Click [Next].
13
Click [Finish].
"Add Printer Wizard" appears.
14
Click [Have Disk].
15
Click [Browse].
16
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver and fax driver
17
Click [OK].
The "Printers" list appears.
18
Click [Next].
19
Follow the instructions on the pages that follow.
% To use a network connection, perform a test print after the network settings have been configured.