Konica Minolta BIZHUB C652DS - Manual (Page 254)

bizhub C652/C652DS/C552/C552DS/C452 13-60
13.4 Administrator Settings 13
13.4.19 Print Data Capture
Specify whether to allow or prohibit data capturing of a print job. (Default: Allow)
Reference
- For details on capturing data of a print job, contact the service representative.
1
In the Administrator Settings screen, press [Security Settings].
% For details on displaying the Administrator Settings screen, refer to page 13-39.
2
In the Security Settings screen, press [Security Details].
3
In the Security Details screen, press [Print Data Capture].
4
Press the desired button.
Whether to allow or prohibit data capturing of a print job is specified.
% For details, contact your service representative.
13.4.20 Secure Print Only
Specify whether the printing from the computer should be limited only to the security document. (Default: No)
Whenever printing is done from the printer driver, the data must be transmitted using the secure printing.
Because this setting requires ID/password for every print job, your job is protected from intercepting by a
third party.
- Yes: Select this option to limit the printing only to the secure documents.
- No: Select this option not to limit the printing to the secure documents.
Reference
- When you print a document on the machine with "Secure Print Only" set to "Yes", specify "Secure Print
Only" on the printer driver so that only the "Secure Print" jobs are transmitted.
- If a normal print job is sent to the machine where "Secure Print Only" is set to "Yes", the print job is
deleted.
d
Reference
For details on secure printing, refer to page 12-5.
1
In the Administrator Settings screen, press [Security Settings].
% For details on displaying the Administrator Settings screen, refer to page 13-39.
2
In the Security Settings screen, press [Security Details].
3
Switch the page by pressing [ ] or [ ], and then press [Secure Print Only].