Konica Minolta BIZHUB C652DS - Manual (Page 73)

bizhub C652/C652DS/C552/C552DS/C452 6-6
6.1 Mac OS X 10.2/10.3/10.4/10.5 6
7
Click [Add].
When the selected printer is registered in the "Print & Fax", the setting procedure is completed.
% If the "Installable Options" window appears, proceed to change the option settings as necessary.
For details, refer to page 10-4.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.
Configuring the LPR settings
TCP/IP setting for the machine
Specify the IP address for the machine.
LPD setting for the printer
Before using LPR printing, enable LPD printing in "LPD Setting" for the machine.
d
Reference
For details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".
For details on the LPD settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
The Ethernet setting window appears.
% For OS X 10.5, select "Ethernet", and then click [Advanced].
% For OS X 10.4, select "Built-in Ethernet", and then click [Configure].
4
Click the "TCP/IP" tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the
network to which the Macintosh computer is connected.
6
Click the close button at the top left corner of the window.
% When the "This service has unsaved changes" message appears, click [Apply].
Adding a printer
1
In the "Apple" menu, select "System Preferences".
2
Click the [Print & Fax] icon.
3
Click [+] on the "Print & Fax" window.
4
Click [IP] or [IP Printer].
5
In "Protocol", select "LPD".