Konica Minolta BIZHUB C652DS - Manual (Page 51)

bizhub C652/C652DS/C552/C552DS/C452 5-13
5.1 Windows Vista/Server 2008 5
5.1.4 For local connection
When this machine is connected via a USB port, the printer driver can be installed with plug and play.
Reference
- When a USB connection is used, the printer driver is installed easily with the plug and play feature.
However, it can also be installed using the Add Printer Wizard. To use the Add Printer Wizard, select
the USB port to be connected in the "Select a Printer Port" page.
1
Connect the machine to the computer using a USB cable, and then start the computer.
NOTICE
When starting up the computer, do not plug in or unplug the cable.
2
Turn on the main power of the machine.
The "Found New Hardware Wizard" dialog box appears.
% If the "Found New Hardware Wizard" dialog box does not appear, turn the machine off, then on
again. In this case, turn off the printer, and then wait approximately 10 seconds before turning it on
again. If you turn the printer on immediately after turning it off, it may not function correctly.
3
Click "Locate and install driver software (recommended)".
The dialog box requesting the disk (CD-ROM) appears.
% If you do not have the disk (CD-ROM), click "I don't have the disc, show me other options". On the
next page, select "Browse my computer for driver software (advanced)", and then specify a desired
printer driver folder.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Insert the printer driver CD-ROM for Windows into the CD-ROM drive of the computer.
The information on the disk is searched for, and then the list of the software supported by the machine
appears.
5
Select a desired printer driver name, and then click [Next].
% Selectable printer drivers:
PCL driver, PS driver, XPS driver and fax driver
6
Follow the instructions on the pages that follow.
% If the "User Account Control" window appears, click [Continue].
7
When the installation completes, click [Close].
8
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
% If the "Windows Security" window for verifying the publisher appears, click "Install this driver
software anyway".
9
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.