Panasonic -eng - Manual (Page 189)

Output mode
- 189 -
DVD-RAM output mode
Action Required
` DVD-RAM discs that can be used are UDF 2.0 formatted
4.7 GB/9.4 GB DVD-RAM discs and 8 cm DVD-RAM
discs.
` When recording, do not log-off Windows such as user
switching (Windows XP). Otherwise, the disc on which
the data is being written may be damaged.
` A [DVD_RTAV] folder is created on DVD-RAM discs
recorded on DVD video recorders complying with the
video recording standard. The various types of video
recording specification files are created in this folder. Do
not delete or make changes to this folder or the files
contained in it from a computer. Doing so will render the
disc unusable with DVD video recorders and VRWriter.
` The disc recorded by VRWriter is not allowed to be
accessed by other applications. If it is attempted to be
accessed by, for example, Explorer, [F:\ is not
accessible. Access is denied.] (When the DVD-RAM
drive is F:.) will be displayed. In this case, exit VRWriter
before accessing.
` The disc recorded in the video recording standard has
been formatted in the UDF 2.0 format. In an environment
where UDF 2.0 is not supported, this disc can be used
only by VRWriter.
` While the DVD-RAM disc is accessed using Explorer or
other applications and data is attempted to be recorded
using this software, it may not be recorded due to an
error that the data is used by other applications. Exit
Explorer or the other applications before using VRWriter.
Note
` Files other than MPEG2 files imported from the SD
Video Camera with which this software is supplied and
MPEG2 files created using this software may not be
output.