Panasonic -eng - Manual (Page 151)

Output mode
- 151 -
About the Output mode
Output mode
About the Output mode
To output data edited with MotionSD STUDIO to SD Video
Camera or any files, or to create files from such data to
attach to an e-mail, you work in the Output mode.
Action Required
∫ About the confirmation of output data
Before outputting data, be sure to confirm the contents
of output data on [File Name] in [Input].
If [Edit track information] is displayed, the data on the
edit track is ready for output.
Note
` For how to switch the operation modes, see @ 25 .
` In all output modes except SD card output mode, still
image clips (BMP/JPEG format) can be output when
they are on the edit track or edit information (SEQ files).
This cannot be output as an independent still image file.
` During output, one area of your Windows installed drive
(system drive, usually C:\) is used as the temporary area
for work. If this temporary area for work is not sufficient,
normal output may not be accomplished. In this case,
increase the free space on the system drive.