ADC CUDA 3 - Manual (Page 586)

ADC Telecommunications, Inc.
584 A PPENDIX A: C OMMAND S UMMARY
SNMP Commands
Table A-13 SNMP Commands
Command Mode Description
snmp-server community
[address
[mask ]]
[context ]
[storage {volatile | nonvolatile |
permanent | readonly}] root Creates an SNMP community.
snmp-server contact root Specifies the SNMP contact for the
network.
snmp-server context
[storage {volatile |
nonvolatile | permanent | readonly}]
[status {enable | disable}] root Creates an SNMPv3 context.
snmp-server group
{v1 | v2c | v3 {auth | noauth | priv}}
[read ] [write
] [notify
] [context
] [storage {volatile |
nonvolatile | permanent | readonly}] root Creates an SNMP group.
snmp-server host
{traps | informs
[timeout ] [retries
]} [version {1 | 2c | 3 {auth |
noauth | priv}}] [udp-port ]
[mms ] [storage {volatile |
nonvolatile | permanent | readonly}]
[notification-type ...] root Creates an SNMP host to receive
trap messages.
snmp-server location root Specifies the physical location of
the Cuda 12000.
snmp-server name root Specifies the system name.
snmp-server user [auth {md5
| sha} [priv des56
]] [storage {volatile |
nonvolatile | permanent | readonly}]
[status {enable | disable}] root Creates an SNMPv3 user for the
SNMP entity.