ADC CUDA 3 - Manual (Page 324)

ADC Telecommunications, Inc.
322 C HAPTER 14: C ONFIGURING IP
Adding IP Source Routes
Source routes are added on a per-interface basis. You add a source route
entry on a particular interface by performing the following tasks:
Examples
The following example configures interface 1/1/1 to forward any packets
received from the 172.16.19.0 network to the router at 172.20.19.4:
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# ip source-route
172.16.19.0 255.255.255.0 172.20.19.4
Similarly, the following example configures interface 1/1/1 to forward any
packets received from host 172.16.19.4 to a next-hop destination of
171.16.19.50:
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# ip source-route
172.16.19.4 255.255.255.255 172.20.19.50
Task Command
1. Enter interface mode. interface
2. Add a source route. ip source-route