ADC CUDA 3 - Manual (Page 337)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Creating Access Lists 335
Displaying Access Lists
To display the contents of a specified access list, perform the following task
within root or interface mode:
Deleting Access Lists
To delete an access list, perform the following task within root or interface
mode:
Note that when filtering is enabled with no access lists applied to the
interface, the interface permits all traffic to pass.
Task Command
1. Display all access
lists within the
system.
show access-list
2. Display a specified
access list.
show access-list
Task Command
1. To delete a
specified access
list.
no access-list
2. To remove all
access lists from
the system.
no access-list all