Rip commands – ADC CUDA 3 User Manual
Page 570

ADC Telecommunications, Inc.
568
A
PPENDIX
A: C
OMMAND
S
UMMARY
RIP Commands
Table A-5 Routing Information Protocol (RIP) Commands
Command
Mode
Description
ip rip accept default-route
interface:
Configures the interface to accept
default routes advertised by
neighbor routers.
ip rip accept host-route
interface:
Configures the interface to accept
host routes advertised by neighbor
routers.
ip rip authentication {md5 |
password}
interface:
Configures the authentication type
for the RIP interface.
ip rip authentication {key-id
interface:
Configures the authentication key
for the RIP interface.
ip rip cost
interface:
Enters the cost or metric of the
current RIP interface.
ip rip default cost
interface:
Enters the cost or metric that is to
be used for the default route entry
in RIP updates originated on the
RIP interface.
ip rip disable
interface:
Disables RIP on the current IP
interface.
ip rip enable
interface:
Enables RIP on the current IP
interface.
ip rip neighbor
interface:
Configures the IP addresses of RIP
neighbors.
ip rip poisoned-reverse
interface:
Configures the interface to
implement poison reverse.
ip rip receive-version {1|2|1 2| none}
interface:
Configures the version of RIP the
current IP interface uses to receive
routes.
ip rip send default-also
interface:
Configures the interface to
advertise the default route in
addition to other routes.