ADC CUDA 3 - Manual (Page 566)

ADC Telecommunications, Inc.
564 A PPENDIX A: C OMMAND S UMMARY
General Commands
Table A-3 General Commands
Command Mode Description
help Any Shows all commands available in
the current mode, and provides a
brief description of each.
Note that you can enter
? to see a list of
available commands without their
associated descriptions.
set paging {on | off} Any Enables or disables the paging of
display output.
set prompt [mode] Any Sets the prompt mode. You can
choose to show the IP address and
current mode within the prompt
display; or choose to display no
information within the prompt.
set time Any Sets the system time.
set timeout Any Sets the timeout for idle CLI
sessions.
shutdown interface::csi Disables a specified interface.
talk Any Enables sending of broadcast
messages to users. This command
also allows you to send a
broadcast message.