ADC CUDA 3 - Manual (Page 156)

ADC Telecommunications, Inc.
154 C HAPTER 8: T IMING AND A LARM C ONTROLLER M ANAGEMENT
To configure the faults for which you want to be notified, perform the
following tasks. By default, the fault reporting status is “disabled” for each
fault:
ps-ac The power supply associated with the chassis
detected the loss of one or more AC inputs.
ps-dc The power supply associated with the chassis
detected a DC out-of-range fault.
ps-temp The power supply associated with the chassis
detected an over-temperature condition.
red-alarm One or more payload blades has asserted a
Red Alarm.
yellow alarm One or more payload blades has asserted a
Yellow Alarm.
Task Command
1. Enter root mode. root
2. Specify the faults that you
want reported.
chassis-fault {backplane |
backplane-power |
backplane-power-a |
backplane-power-b |
backplane-temp |
bits-a |
bits-b |
blue |
fan-rotation |
fan-temp |
local-pwr-a |
local-pwr-b |
processor-temp |
ps-ac |
ps-dc |
ps-temp |
red-alarm |
yellow}
Fault Description