ADC CUDA 3 - Manual (Page 386)

ADC Telecommunications, Inc.
384 C HAPTER 18: C ONFIGURING C ABLE M ODEM T ERMINATION S YSTEMS
Downstream transmit-power
The Downstream transmit-power (TenthdBmV) parameter sets the nominal
output transmit power level. By default, Channel Power is set at 550
TenthdBmV. Acceptable values: 0–650.
You set the downstream output transmit power level by performing the
following tasks.
Task Command
1. Enter interface cable mode. interface cable
2. Set the output transmit power
level.
downstream transmit-power
<0..650>