ADC CUDA 3 - Manual (Page 572)

ADC Telecommunications, Inc.
570 A PPENDIX A: C OMMAND S UMMARY
OSPF Commands
Table A-6 Open Shortest Path First (OSPF) Commands
Command Mode Description
asbr router:ospf Configures the system as an
Autonomous System Border
Router (ASBR).
ip ospf area-id
[{enable | disable}] interface::csi
:ip-address
Configures the Area ID for the
current interface. The Area ID
designates the OSPF area to which
this IP interface belongs.
ip ospf authentication {md5 |
password} interface::csi
:ip-address
Configures the authentication type
for the OSPF interface.
ip ospf authentication {key-id
key | key } interface::csi
:ip-address
Configures the authentication key
for the OSPF interface.
ip ospf cost interface::csi
:ip-address
Defines the cost metric for this IP
interface.
ip ospf dead-interval
interface::csi
:ip-address
Defines the dead-interval for this IP
interface.
ip ospf hello-interval
interface::csi
:ip-address
Specifies the length of time, in
seconds, the router waits between
sending Hello packets on the
current IP interface.
ip ospf priority interface::csi
:ip-address
Assigns the interface priority the
current IP interface.
ip ospf retransmit-interval
interface::csi
:ip-address
Sets the Link State Advertisement
(LSA) retransmit interval in seconds
for the current IP interface.
ip ospf transit-delay
interface::csi
:ip-address
Sets the number of seconds it
takes to transmit a link state
update packet on the current IP
interface.