ADC CUDA 3 - Manual (Page 520)

ADC Telecommunications, Inc.
518 C HAPTER 20: S UBSCRIBER M ANAGEMENT
Viewing CPE Control Parameters and CPE Devices
You can view CPE control parameters and CPE devices.
Viewing CPE Control Parameters
To view CPE control parameters, perform the following tasks:
Task Command
1. From any mode, view default
CPE control parameters.
show cpe-control
2. From interface:cable:csi
mode, view CPE control
parameters for all cable
modems using the interface.
show modem cpe-control
3. From interface:cable:csi
mode, view CPE control
parameters for a specific cable
modem using the interface
(specify the cable modem’s
MAC address).
show modem cpe-control