ADC CUDA 3 - Manual (Page 584)

ADC Telecommunications, Inc.
582 A PPENDIX A: C OMMAND S UMMARY
Chassis Commands
Table A-12 Chassis Commands
Command Mode Description
aux-device backplane-clock-a {bits-a
| bits-b | internal | none | slot
{enable | disable}} root Configures primary clock (A).
aux-device-backplane-clock-b {bits-a
| bits-b | internal | none | slot
{enable | disable}} root Configures secondary clock (B).
boot {enabled | disabled | reset} slot
slot Use this command to hard boot
the current module or disable the
module (bring it offline).
ccdown root Shuts down the management
module. Use this command only if
you have physical access to the
system.
chassis {description | group
| mcs {enable |
disable}} root Configures chassis group support.
chassis-config root Configures the chassis ID for the
selected chassis. Valid range: 1–
128.
chassis-config
clusterid root Assigns the selected chassis to a
cluster.
chassis-config
manager secondary root Configures the management
module as a primary or secondary
manager.
chassis-config
scope {chassis | cluster} root Defines the management scope.
connect [password
] [user ] root Connects you to another Cuda
12000.
db-check root Validates provisioning database
access information.
db-connect
root Configures provisioning
information.