Viewing services – ADC CUDA 3 User Manual
Page 451

Cuda 12000 IP Access Switch CLI-based Administration Guide
Viewing Services
449
Viewing Services
Services are assigned when the cable modems are provisioned. The CMTS
dynamically assigns a Service ID number to the cable modem. A cable
modem keeps the same Service ID for as long as it continues to range and is
registered with the CMTS. For example, if a cable modem is reset or goes
through a power cycle, CMTS reassigns the next available Service ID number
to the cable modem the next time it ranges and registers. To view a list of
services currently assigned by the cable interface, perform the following task
in
interface cable
mode.
Task
Command
1. Enter this command from within
root mode or cable interface
configuration mode to sort the
cable modem display according to
services assignment ID.
show interface cable
2. Enter this command from within
cable interface configuration
mode to sort the cable modem
display according to services
assignment ID.
show
3. Issue this command from within
root mode or cable interface
configuration mode to display a
specific cable modem according
to SID.
show interface cable
4. Enter this command from within
cable interface configuration
mode to display a specific cable
modem according to SID.
show sid