ADC CUDA 3 - Manual (Page 258)

ADC Telecommunications, Inc.
256 C HAPTER 12: C ONFIGURING DHCP R ELAY
To configure a DHCP Policy and a BOOTP policy, perform the following tasks:
To display the DHCP or BOOTP policies currently configured on a cable
interface, perform the following tasks:
Task Command
1. Enter cable interface mode. interface cable
2. Create a DHCP Policy. dhcp-policy { | default} {deny |
permit} {... | forward-internal
[disable] } [agent-option {cm | cpe} | cmmac
| interface | mac
[mask ]]
[vendor-class-id {cm | mta}] [description
]
3. Create a BOOTP policy. bootp-policy { | default}
{deny mac [mask ] ...
| permit ... mac
[mask ] ...} [description ]
Task Command
1. Enter cable interface mode. interface cable
2. Display all DHCP policies. show dhcp-policy
3. Display all BOOTP policies. show bootp-policy
4. Display a specified DHCP policy. show dhcp-policy
5. Display a specified BOOTP
policy.
show bootp-policy
6. Display the default DHCP policy. show dhcp-policy default
7. Display the default BOOTP
policy.
show bootp-policy default