ADC CUDA 3 - Manual (Page 531)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Cable Modem and MTA Command Output Descriptions 529
Table 21-6 docsIfCmStatusTable Parameters
docsIfCmServiceRqExceededs Number of requests for bandwidth that failed
due to excessive retries without
acknowledgement.
CLI Output Description
docsIfCmServiceStatusValue Current cable modem connectivity state.
docsIfCmServiceStatusCode Status code for this cable modem. This value
consists of a single character indicating an error
group and two or three numbers indicating the
status condition.
docsIfCmServiceTxPower Operational transmit power for the attached
upstream channel.
docsIfCmServiceResets Number of times the cable modem resets or
initializes.
docsIfCmServiceLostSyncs Number of times the cable modem lost
synchronization with the downstream channel.
docsIfCmServiceInvalidMaps Number of times the cable modem receives
invalid MAP messages.
docsIfCmServiceInvalidUcds Number of times the cable modem receives
invalid UCD messages.
docsIfCmServiceInvalidRangi Number of times the cable modem receives
invalid ranging response messages.
docsIfCmServiceInvalidRegis Number of times the cable modem receives
invalid registration response messages.
docsIfCmServiceT1Timeouts Number of times counter T1 expires in the
cable modem.
docsIfCmServiceT2Timeouts Number of times counter T2 expires in the
cable modem.
docsIfCmServiceT3Timeouts Number of times counter T3 expires in the
cable modem.
docsIfCmServiceT4Timeouts Number of times counter T4 expires in the
cable modem.
docsIfCmServiceRangingAbort Number of times the ranging process was
aborted by the CMTS.
CLI Output Description