ADC CUDA 3 - Manual (Page 537)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Cable Modem and MTA Command Output Descriptions 535
Auth Reject Wait The cable modem received an
Authorization Reject message in response
to its last Authorization Request. The
Authorization Reject’s error code indicated
that the error was not of a permanent
nature. In response to receiving this reject
message, the cable modem set a timer
and transitioned to the Authorized Reject
Wait state. The cable modem remains in
this state until the timer expires.
docsBpiCmAuthKeySequence
Number Authorized key sequence number of this
FSM.
docsBpiCmAuthExpires Actual clock time when the current
authorization for this FSM expires. If the
cable modem does not have an active
authorization, the value is the expiration
date and time of the last active
authorization.
docsBpiCmAuthReset
The options are:
Determines the reauthorize event status.
True Generates a reauthorize event in the
authorization FSM
False Does not generate an authorization event.
docsBpiCmAuthGraceTime Grace time for an authorization key. A
cable modem is expected to start trying
for a new authorization key beginning the
grace time number of seconds before the
authorization key actually expires. This
value cannot change while the
authorization state machine is operating.
docsBpiCmTEKGraceTime The TEK Grace Time in seconds before TEK
expires.
docsBpiCmAuthWaitTimeout The authorize wait timeout. This value
cannot change while the authorization
state machine is operating.
docsBpiCmReauthWaitTimeout Reauthorize wait timeout, in seconds. This
value cannot change while the
authorization state machine is operating.
CLI Output Description