ADC CUDA 3 - Manual (Page 575)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Cable Interface Administration Commands 573
Cable Interface Administration Commands
Table A-8 Cable Interface Administration Commands
Command Mode Description
admission-control {enable | disable} interface:cable:csi Enables and disables the admission
control function.
cm modify upstream
{ | |
} interface:cable:csi Moves the specified cable modem
to a new upstream port. Note that
the new upstream port must be
enabled before issuing this
command.
downstream frequency
interface:cable:csi Sets the downstream frequency on
the current cable (CMTS) interface.
downstream interleave-depth
interface:cable:csi Sets the downstream interleave
depth on the current cable (CMTS)
interface.
downstream modulation
{qam64 | qam256} interface:cable:csi Defines the modulation type that
you want the downstream channel
on the current cable (CMTS)
interface to use — 64qam or
256qam.
downstream no shutdown interface:cable:csi Sets the downstream channel
status on the current cable (CMTS)
interface to up.
downstream shutdown interface:cable:csi Sets the downstream channel
status on the current cable (CMTS)
interface to down.
downstream transmit-power
interface:cable:csi Sets the transmit power of the
downstream channel on the
current cable (CMTS) interface.
flap-list aging interface:cable:csi Defines the number of days to
retain flapping activity on cable
modems connected to this cable
interface.
flap-list clear interface:cable:csi Resets (clears) all counters in the
cable modem flap list on the
current cable (CMTS) interface.