ADC CUDA 3 - Manual (Page 160)

ADC Telecommunications, Inc.
158 C HAPTER 8: T IMING AND A LARM C ONTROLLER M ANAGEMENT
To configure the alarm signals for transmit over the DB-15 connector and the
associated signals that can trigger them, perform the following tasks. By
default, all faults are configured to not send out their associated alarm
signals over the DB-15 connector:
Power Alarm
■
local-pwr-a-fault
■
local-pwr-b-fault
■
backplane-pwr-fault
■
backplane-pwr-a-fault
■
backplane-pwr-b-fault
■
ps-ac-fault
■
ps-dc-fault
Temp Fault
■
processor-temp-fault
■
ps-temp-fault
■
fan-temp-fault
Power Fault
■
local-pwr-a-fault
■
local-pwr-b-fault
■
backplane-pwr-a-fault
■
backplane-pwr-b-fault
■
ps-ac-fault
■
ps-dc-fault
PowerA Fail
■
local-pwr-a-fault
PowerB Fail
■
local-pwr-b-fault
Clock
■
bits-a-fault
■
bits-b-fault
■
red-alarm-fault
You Can Configure This
Signal:
To Provide Notification of These Faults: