ADC CUDA 3 - Manual (Page 334)

ADC Telecommunications, Inc.
332 C HAPTER 15: IP P ACKET F ILTERING
Creating IP
Access Lists
To create an IP access list, perform the following task in either root mode or
interface configuration mode:
For example, the following access list denies IP packets with the source
address of 172.16.19.200:
cli:172.16.19.10:root# access-list 4 deny 10 ip 172.16.19.200
0.0.0.0 any
Creating TCP
Access Lists
To create a TCP access list, perform the following task in either root mode or
interface configuration mode:
Task Command
Create an IP access
list. access-list {deny | permit}
ip { | host address> | any} { mask> | host | any} [tos
] [change-tos ]
Task Command
Create an TCP access
list. access-list {deny | permit}
tcp [ | host address> | any} { mask> | host | any} {
| host |
[] | any}] {< IP address> < mask > | any | host address> [ [] ] established]
[tos ] [change-tos ]