ADC CUDA 3 - Manual (Page 368)

ADC Telecommunications, Inc.
366 C HAPTER 17: M ANAGING IP M ULTICAST
Displaying Multicast Routes
Use this procedure to display multicast routes:
When issued with the summary argument, the command provides this
information:
■
MRoute Group — IP Multicast group address that contains the multicast
routing information.
■
Up Time — Time in hours, minutes, and seconds since the multicast
routing information was learned.
When issued with no argument or the argument, the
command provides this information in addition to the summary information:
■
Outgoing Interface — Interface on which the multicast route is learned
or joined.
■
Outgoing Interface Up Time — Time in hours, minutes, and seconds
since the multicast routing information was learned.
Task Command
1. Enter root mode or interface
mode.
enable root
or
interface
2. Display summary information on
multicast routes, details on
multicast routes, or details on a
specific multicast route.
show ip igmp mroute
{ | summary}