Options dialog box—configuration tab – HP SAN Virtualization Services Platform User Manual
Page 232
2.
Select the Configuration tab. The configuration options appear.
Figure 49 Options dialog box—Configuration tab
3.
In the Storage Pool Protection Threshold area, set the capacity thresholds for each warning level.
For each warning level, define the threshold by percentage (%) of storage pool capacity remaining
on the left and total (GB) capacity remaining on the right.
4.
Click OK.
For information about configuring the free capacity alert threshold for a storage pool, see
“
Changing storage pool free capacity alert threshold
Storage pool capacity is evaluated against the configurable free capacity alert threshold. When the
free capacity of a storage pool drops below the threshold:
•
A notification is sent to any notification groups configured to receive this type of alert. For inform-
ation about configuring notification groups, see “
Configuring event log notifications
The notification is repeated every five minutes.
•
Creation of new virtual disks from the storage pool is blocked. This includes temporary virtual
disks. Therefore, PiT creation is also blocked.
•
Virtual disks from the storage pool are expanded by chunks that are limited to 1 GB, and not ac-
cording to the normal algorithm which uses 5% expansion.
Using snapshots
232