HP XP P9500 Storage User Manual
Page 586
Copy Group Type : UR Copy Group ID : GRP1UR2
Description . . . . . . . . . . . . . COPY GROUP 5
Primary Device Address Domain . . . : SF
Secondary Device Address Domain . . : LA
Enable EXCTG Attributes EXCTG ID(Forward) EXCTG ID(Reverse)
------------------------------------------------------------------------------
Supported actions: e(Edit), d(Delete) / Use Container
Grp C/T ID Primary ----------- Secondary --------- Path ID
AC Num sub Pair(s) S S/N ArbCdev S S/N ArbCdev
1 0C
0C 0 14002
14001
00
******************************* Bottom of data ********************************
F1=Help F3=Exit F4=Attr F5=Add F6=Sort F7=Backward
F8=Forward F12=Cancel
7.
If you want to add another consistency group, repeat steps 1 through 6.
Changing a copy group that is not a copy group container to one that is (adding a
consistency group)
To change a copy group that is not a copy group container to one that is:
1.
Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel appears.
2.
Specify e in AC, and press the Enter key.
The Copy Group Pair Detail panel appears.
3.
Specify / for Use Container.
Copy Group Pair Detail Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/03/04 11:10:27
Copy Group ID : GRP1UR / Use Container
Description . .
Copy Group Type : CAJ
------------------------------------------------------------------------------
Supported actions: d(Delete)
AC Grp VOLSER Pri: SF-------------- Sec: LA-------------- CYL
Num Devn - SN -- SSID CU CCA Devn - SN -- SSID CU CCA
1 7311 14002 2340 00 11- 2A01 14001 2350 00 01-
1 7312 14002 2340 00 12- 2A02 14001 2350 00 02-
******************************* Bottom of data ********************************
F1=Help F3=Exit F4=Attr F5=Add F6=Sort F7=Backward
F8=Forward F12=Cancel
4.
Press the Enter key.
The Copy Group Detail Definition panel is displayed.
The following steps for adding a consistency group is the same as the steps described in
“Adding a consistency group” (page 585)
.
Changing a copy group that is a container to one that is not (deleting a consistency
group)
To delete a consistency group from a copy group container:
1.
Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel appears.
2.
Specify e in AC, and then press the Enter key.
586 Using the ISPF panels