HP XP P9500 Storage - Manual (Page 212)

Table 67 How to Prepare the Configuration Files at Each Site (HyperSwap)
How to Prepare Contents File Type
At the Secondary Site At the Primary Site
Transfer from the primary
site Perform a local scan The primary site
configuration Disk configuration
definition file
Perform a local scan Transfer from the secondary
site The secondary site
configuration
Not required Define a path set Path set definition file •
An inter-control unit
logical path from the
primary storage system
to the local storage
system
•
An inter-control unit
logical path from the
local storage system to
the primary storage
system
•
An inter-disk controller
logical path from the
primary storage system
to the remote storage
system
•
An inter-disk controller
logical path from the
local storage system to
the remote storage system
Define a path set Not required •
An inter-disk controller
logical path from the
remote storage system to
the primary storage
system
•
An inter-disk controller
logical path from the
remote storage system to
the local storage system
Not required Define a route list Route list definition
file/Command device
definition file • A route/command device
from the local storage
system to the remote
storage system
• A route/command device
from the primary storage
system to the remote
storage system
Define a route list Not required •
A route/command device
from the remote storage
system to the primary
storage system
•
A route/command device
from the remote storage
system to the local
storage system
Transfer from the primary
site Define a copy group A Cnt Ac-S Z copy group
with the HyperSwap
attribute Copy group definition file
212 Configuration definitions