HP XP P9500 Storage User Manual
Page 519
2.
Specify CONFIG01 in Configuration File Prefix and SF in Local Device Address Domain ID.
Set Defaults
Command ===>
2008/02/26 15:28:18
Specify Default Settings
More: +
Configuration File Prefix . . . . CONFIG01
Local Device Address Domain ID . . SF
ISPF Log Max . . . . . . . . . . . 0
Remote DKC Function . . . . . . . Y
Preset RouteListID . . . . . . . .
Preset Route Label . . . . . . . .
Defaults and Options for Background Jobs
SEND Options . . . . . . USER(*)
Timeout Hours . . . . . 0
Timeout Minutes . . . . 30
Job Name Prefix . . . . YUKON37
JCL JOB Statement:
//JOBNAME JOB MSGCLASS=H,NOTIFY=YUKON37
//*
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
3.
Press the F3=Exit key.
You are returned to the Main Menu panel.
4.
Choose 3 Discover/Define Configuration.
The Discover/Define Configuration panel appears.
5.
Choose 1 Discover HP Storage.
The Discover HP Storage Arrays panel appears. In the initial status, no display line appears.
6.
Press the F4=Discover key.
The Scan Device Address Extent panel appears.
7.
Specify / for Device Num or Volser to set the scan target, and specify the scan range in Start
and End.
Scan Device Address Extent
Command ===>
2008/03/19 14:56:47
Select one field from among Device Num, Volser, and Non Gen'ed by entering
"/". Next, specify any contiguous range of device address, and then press the
F6=Scan key to discover Hitachi storage systems and devices.
Device Num ( / ) | Start: 7310 End: 731B
Volser ( ) | Start:
End:
------------------------------------------------------------------------------
Non Gen'ed ( )
Supported action: s(Select)
AC
Non Gen'ed Device Address Domain . .
Storage System S/N . . . . . . . . .
Device Address | Start CU:
CCA:
| End CU:
CCA:
F1=Help F3=Exit F6=Scan F7=Backward F8=Forward F12=Cancel
Acquiring volume information
519