HP XP P9500 Storage - Manual (Page 526)

Figure 122 Inter-DKC logical path definition example
NOTE: Before defining a new path set, check the cable connection port number as described in
“Establishing a logical path” (page 540) .
To define a new path set:
1.
In the Discover/Define Configuration panel, choose 3 Path Set Definitions.
The Path Set Selection List panel displays.
Path Set Selection List Row 1 to 1 of 1
Command ===>
Scroll ===> PAGE
2008/02/28 16:01:52
Supported actions: e(Edit), d(Delete)
AC Path Set ID ------------------------- Description --------------------
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
2. Press the F5=Add key.
The Add Path Set panel displays.
3. Specify the path set ID.
Add Path Set
Command ===>
2008/02/28 16:02:07
Enter the following Path Set attributes.
Path Set ID . . TESTPATH
526 Using the ISPF panels